BEUMER Loading Systems

Loading technology:
Precise, safe and clean.

Always in the right position with BEUMER Group.

Goods vehicles, railway wagons, ships or barges - there is no form of goods transport for which BEUMER Group does not offer an ideal loading solution. The actual loading machine remains the focus of attention. Customers select additional components to build complete loading systems to meet their precise requirements and BEUMER Group plans, manufactures and installs the complete system. BEUMER Group loading systems are characterised by efficiency, ease of use and superior performance.

At a
glance:

  • Equipment for the loading of bulk materials in heavy goods vehicles, railway trucks and vessels
  • Truck unloading equipment

Loading systems
for ships

We offer two different systems for ship loading. Coarse bulk materials, such as clinker or lumpy ores, are loaded into bulk carriers via BEUMER Group belt conveying systems and a vertical telescopic loading head, efficiently and without dust. Swivelling and telescopic ship loaders ensure filling most of the cargo space without shifting the ship.

The loading of powdered goods is handled by fully enclosed loading machines. This, in connection with the required filter systems, reduces the environmental impact to a minimum.


Loading head
for tanker vehicles

Tanker vehicles can be loaded quickly and free of dust by means of the BEUMER Group bulk loading head. It is designed according to the double-wall system i.e. material flow and dust extraction are separate from one another. The loading head must be connected to a dust-collecting air system. The lifting device is a motorized or manual cable winch. The material feed must be dosed. The device is operated by means of a suspended push-button switch.

When setting down on a filling spout, the sealing cone of the loading head lowers further and simultaneously opens the material outlet spout. The variable lowering level of the sealing cone with filling level indicator makes it possible to adjust the material level in the vehicle. For setting down, the loading head can be moved to the side to conform precisely to the position of the vehicle. At the end of the loading process the vibrator starts to loosen any material left in the head to prevent dust accumulation on the vehicles.


Loading equipment
for open vehicles

For dust-free loading of open vehicles, various types of telescoping loading systems are available. At the start of the loading process, the head is lowered to the base of the vehicle and material feed is switched on. The unit is raised automatically by a filling level monitor located at the lower end of the conical valve which is dampened by the upward material. The bottom of the conical valve always remains on top of the material so that no dust can escape to the outside. The dust extraction bellows or telescoping tubes are connected to a central dust suppresion air system. Material is fed in by corresponding equipment or rotating gates.

Facebookicon
Twitterticon
LinkedInicon
Youtubeicon