Storage & Blending Bed

From single buffer storages and blending beds to complete Bulk Terminals, BEUMER offers the complete range of required equipment for your industry: Mining, Cement, Power, Chemical (fertilizer) and Food (grains). Besides the conveyor technology, BEUMER can supply the stackers and reclaimers best suited for your task.

Basic tasks of a storage

Based on the specific task (buffering, collecting and distributing, blending/homogenizing) and the resulting incoming and outgoing material flow, first the storage capacity is decided upon. Together with the material properties this then leads to a choice of available stacking and reclaiming methods as well as to the two basic stockpile layouts, namely the longitudinal stockpile arrangement and the circular stockpile arrangement.

In short, the longitudinal arrangement allows easy future expansion but requires more space, while the circular arrangement makes future expansion basically impossible but has a more compact footprint. The stacking method depends firstly on the required blending ratio. More complex stacking methods enable better blending ratios, while requiring more complex stackers. If no blending is required, the simplest stacking method (Coneshell) will be chosen. It requires no slewing gear in the stacker and simplifies the movement of the stacker during stacking.

Longitudinal stockpile arrangement for:

  • High storage capacity (up to > 1.000.000 to)
  • live storage volume lower than circular storage
  • Possibility of future expansion
  • Passive storage can easily be added on

Circular stockpile arrangement for:

  • Limited storage capacity (up to 100.000 to)
  • live storage higher than longitudinal storage, endless continuous stacking & reclaiming possible
  • No future expansion possible

Different stacking methods:

If blending is required, Chevron (or Chevcon for circular storages) is the next choice, as also here no slewing gear in the stacker is required. The specialty of Strata is that one could reclaim the material also from the side and still reach some kind of blending. The Windrow method requires the most expensive stacker, however it means that at no time the falling distance of material is high, thus segregation of the material as it rolls down the pile is kept to a minimum.

BEUMER Stacker and Reclaimer

Radial stacker

The stacker is chosen based on the stockpile layout, the material properties and the required stacking method. For example, a stacker must reach the whole cross section of the pile, if Windrow stacking is required, for Chevron or Coneshell it is enough to reach the center of the pile only. The stacking process can be done by a simple tripper car or it can be a stacker with both luffing and slewing gear to enable more complex stacking methods or to allow the stacker to serve two parallel piles.

Semi-Portal Reclaimer

The reclaimer is selected depending on the task of the storage and the material properties. A reclaimer can take the material either from the side of the pile or from the front. In team with the stacker, it decides on the blending ratio of the storage. When operating from the side, reclaimers will be equipped with scraping chains to scrape the material towards a conveyor located alongside the pile. When operating from the front, there will usually be a rake that brings the material to the bottom, from where it is taken up by a scraping chain. This has the advantage that material from the whole cross section of the pile is reached at the same time, thus significantly increasing the blending Ratio.

Selection process for storage and blending bed technology

BEUMER will support you in discussing the advantages of longitudinal and circular storages and together with you select the best combination of stackers and reclaimers for your task. Possible bottle necks and their consequences regarding plant availability will be looked at to ensure a good function of the material handling process.

BEUMER storage and blending bed equipment is provided for the following industries: Mining, Cement, Power, Chemical (fertilizer) and Food (grains). Our typical stackers and reclaimers work with a material capacity of up to 4000 t/h.